SECO LARM USA Door SD 969 A18 User Guide

ENFORCER

Designed to allow egress from inside

an area normally locked by an electric

lock or electromagnetic lock, and/or to

disarm (shunt) or trigger an alarm

when the door is opened.

Push-To-Exit Bar

MODEL: SD-961A-36

FEATURES:

•

Rugged, heavy-duty construction.

Pushing the bar at any point sends a signal to release the lock and/or sound an alarm.

For 36 inch doors (actual length is 34.5 inches). Can be cut to size.

Includes 2 built-in non-latching (momentary), normally open and normally closed

(N.O. and N.C.) contacts.

•

Two dual-contact switches (NO/COM/NC) — 5Amps @ 125VAC.

Attractive brushed aluminum bar with black base and trim.

Includes SECO-LARM SD-969-A18 Armored Door Cord, and

mounting hardware (for mounting in wood or metal doors).

•

Designed for easy cutting in field to match width of non-

standard-sized doors.

Available by special order in the following additional sizes:

— For 42 inch doors (actual length is 40.5 inches).

— For 48 inch doors (actual length is 46.5 inches).

Armored Door Cords

MODEL: SD-969-S18

SD-969-A18

FEATURES:

• Designed to conduct power to electric locks or

access systems mounted in doors.

• 18” Stainless-steel cable.

• Mounting screws included.

• Surface mount.

SD-969-S18